![]() Ok, that makes more sense and an important distinction for anyone who isn't used to Sun hardware to realize (This is my first experience with a Sun server).I think I have been starting the system board using start /SYS because the fans, etc in the server would really take off after issuing that command. Please, don't forget to start the system board.Regarding ILOM boot process, this is just the boot sequence for the ILOM card that is here for remote management. How can I check what it is using for a console output device? I just need to change the boot order so that it uses the OS install CD? Thank you /SP/console is just there to allow console access. I also can't get a BIOS screen to show up for the system, though I can watch the full ILOM boot process in the serial connection. The machine doesn't seem to detect any hardware problems. ![]() I can't get anything except a blank black screen from the locally attached monitor or the java remote console. To stop, type ESC (" It will return to the -> prompt if you press the escape characters, however, it doesn't bring up another prompt (such as ok>) and it doesn't respond to any other input. I can also get to the web admin page and launch the remote java console. However, when I enter the start /SP/console command from a Serial or SSH session the session hangs at "Serial console started. I am able to connect to ILOM (version 2.0.2.1) through the Serial management port and using SSH in Putty. ![]() Sun Fire x4100 - Servers General Discussion I recently got a Sun fire x4100 server, which does not have an OS loaded.
0 Comments
Leave a Reply. |